For Converting Testing

Device Description: sturdy punch fully made from metal with feeder table and hand lever for easy operation. The punch and dye cutting unit consist of an upper and lower blade guarantees accurate sample strips . for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests. It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible.

Test Description : the sample materials is placed on the feeder table and supported by the feeder edged placed under the punching unit. By pushing the hand lever down , the sample is automatically clamped and a safety guard covers the punching unit. The sample strips fall through the lower part of the punching unit and are collected on a metal support plate.

Device Description: sturdy punch fully made from metal with feeder table and hand lever for easy operation. The punch and dye cutting unit consist of an upper and lower blade guarantees accurate sample strips . for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests. It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible.

Test Description : the sample materials is placed on the feeder table and supported by the feeder edged placed under the punching unit. By pushing the hand lever down , the sample is automatically clamped and a safety guard covers the punching unit. The sample strips fall through the lower part of the punching unit and are collected on a metal support plate.

Device Description : The metering bar coater is a table top instrument with a quick clamping unit for the sample . the coating materials (like a piece of paper and board) lies on a rubber – melinex surface . A metering bar is clamped into a clamp system and the coating colour is put on front of the bar . the motor moves the bar with a predefined speed over the coating material and stops when the end is reached . the bar is lifted off the coated samples and motor moves the system back to start position.

Test Description : The sample us clampled on the coater . A metering bar is slected and put into the bar holder . the bar is at starting position. The coating colour is poured onto the coated materials in front of the bar . the motor starts and the coated colour is evenly distributed on the sample . the coating thickness can be between 4um and 120um and is reached by selecting the special metering bar.

Definition : This method measures the force perpendicular to the plane of the paper required to tear multiple plies

through a specified distance after the tear has been started using an Elmendorf-type tearing tester. The measured results can be used to calculate the approximate tearing resistance of a single sheet.

More than one sheet of the sample material are torn together through a fixed distance by means of the pendulum

of an Elmendorf-type tearing tester. The work done in tearing is measured by the loss in potential energy of the

pendulum. The average force exerted when a certain number of plies are torn together (work done divided by the total distance torn).

Standardization : TAPPI T-414 , APPITA P-400 , SCAN P-11 , ASTM D 689 , D 751 , D 1424 , IS 1060 , IS 1991.

Device Description : Easy to operate and has high accuracy level ± 1% of readout value and reliability with adjustable base leveling screws. Incision knife of hardened and ground spring steel . precision clamps with controlled jaws made of SS. Extra light low friction pointer with friction lining of textile materials. The complete pendulum is interchangeable . the scale is calibrated in mN/gmForce.

Test Description : the operator places the samples and an initial cut is made in set of four test pieces which are then torn through a given distance .the work done in tearing the test pieces is measured as the loss in potential energy of a pendulum . Again The instrument is ready for further measurements.

Device Description : This sturdy machine is easy to operate due to its PC based Software operation. Its software has many pre-installed tests like standard 100 mm tensile test for 15mm stripes or 50mm stripes for tissue. It comes with one load cell of 25 kgs , 50 kgs . The pneumatically driven clamps have sample detection and then can be started manually by a start button. This is useful if transparent samples are to be tested.The maximum distance between the clamps is 300mm . Windows based panel PC gives the dynamic versatility to operate seamlessly almost anywhere either in a laboratory or machine shops . the test speed is adjustable as per user convenience

Description : the user places the strips and the clamps are closed automatically . By pressing the start button the sample is stretched until there is break in the sample. The figures, curves, statistics with max, min, mean as well as the standard deviation are shown on the PC software screen and can be printed simultaneously. After the test theclamps move to their original position for next sample and so on . The software comes with the preinstalled tests as they are described in the standards. Company specific tests can be set as well. All the parameters like testing speed, testing length, breaking and preload levels can be adjusted individually

Definition: Precision Cutter for speedy and accurate cutting of samples of 100cm2 in area without any deformation and damage.

Device Description : the cutter is made of casted aluminum base with a industrial grade corrosion resistant knife and easy to operate press handle for accurate cutting of the samples of size 100cm2 or desired range. The Cutter has a high capacity and several layers of paper profile can be punched out in one operation simultaneously. Test Description : Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 100 cm2 in area without any deformation and damage.

Definition : Thickness or caliper of paper, paperboard, or combined board as measured by this method is

defined as the perpendicular distance between the two principal surfaces of the paper or paperboard

under prescribed conditions, as measured between hard metal platens..

Standardization : ISO 534, EN 20534 , SCAN P7 , TAPPI T 411 .

Device Description : Measuring Spindle with constant lowering speed (1mm/sec) , Hardened and lapped

measuring face . Provided with dial type indicator.

Test Description : A C frame structure having two parallel plane circular faces fitted with high precision distance

measuring display , a piece of sample placed between these faces under constant load and specified speed is

measured .

Device Description: This sturdy machine is easy to operate due to its on screen LCD and the clear control buttons. Its software has many pre-installed tests like standard 100 mm tensile test for 15mm stripes. It comes with one load cell of 500 N Load. The pneumatically driven clamps are optional, as standard delivery the machine comes with hand operated clamps. Separate Start, Stop button for easy use .The maximum distance between the clamps is 300mm. On the panel is provided a USB connection for easy PC transfer of test data and export in excel format. The test speed is adjustable between 0.1 to 700 mm/minute.

Test Description: the user places the strips and the clamps are closed manually. By pressing the start button the sample is stretched until there is break in the sample. The figures, curves, statistics with max, min, mean as well as the standard deviation are shown on the PC software screen and can be printed simultaneously . After the test the clamps move to their original position for next sample and so on . The software comes with the preinstalled tests as they are described in the standards. Company specific tests can be set as well. All the parameters like testing speed, testing length, breaking and preload levels can be adjusted individually.